Cannot find database error

Post Reply
tjcr
WUFI User
WUFI User
Posts: 5
Joined: Mon Feb 03, 2014 4:14 am -1100

Cannot find database error

Post by tjcr » Mon Feb 03, 2014 4:33 am -1100

Hi,

i have just installed WUFI 2d 3 onto pc and install went fine, but when i wan to open WUFI it says it cannot find the database. When i try to run the WUFI-DB file it says setup error: unauthorized call.

I do not have the computer connected to the internet...would this be an issue?

Wandered if you could help?

Many thanks

Tom

Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 833
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:

Re: Cannot find database error

Post by Christian Bludau » Mon Feb 03, 2014 5:04 am -1100

Hello Tom,

please reinstall WUFI 2D, but unzip all files to one folder before calling the installation. If you call teh installation from the zip-file, the database is not found and will not be installed.

A connection to the Internet is not necessary...

Christian

tjcr
WUFI User
WUFI User
Posts: 5
Joined: Mon Feb 03, 2014 4:14 am -1100

Re: Cannot find database error

Post by tjcr » Mon Feb 03, 2014 5:32 am -1100

Christian

Thanks for your quick reply. I have done that and it still provides me with the same error.
The data base appears to have been installed

Tom

Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 833
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:

Re: Cannot find database error

Post by Christian Bludau » Mon Feb 03, 2014 8:12 pm -1100

Hello Tom,

for some reason Wufi2D doesn´t find your database.
Do the following: Open the file-explorer and enter this in the address line:
:arrow: %appdata%\WUFI2d-3.3.ini
An editor should open with the ini-file.
If not first enter %appdata%, then edit WUFI2d-3.3.ini.

Add the following lines to the file:

Code: Select all


[Climate]
database=C:\ProgramData\WUFI\Database\IBP_24.mdb
Save and try to start Wufi 2D.

Hope that works,
Christian

tjcr
WUFI User
WUFI User
Posts: 5
Joined: Mon Feb 03, 2014 4:14 am -1100

Re: Cannot find database error

Post by tjcr » Tue Feb 04, 2014 1:12 am -1100

Christian,

I have done as you suggested and input the information. I have also tried C:\ProgramFiles\WUFI\Database\IBP_24.mdb and this still doesnt work.

It cam to my attention that the directory= section is also blank - should there be something there?

Thanks again

Tom

Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 833
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:

Re: Cannot find database error

Post by Christian Bludau » Tue Feb 04, 2014 1:49 am -1100

Hello Tom,
the directories are set later. thats no problem.
I forgot to write: you have to enter the path, where your database is.
Please check the location of your ibp_24.mb before entering the path. further you need full writing rights in this path.
What Windows do you use?
Christian

BTW: Thats my ini on win7:

Code: Select all


[Application]
CacheDirectory=C:\Users\chb\AppData\Local\Temp\WFD\
HomeDirectory=C:\Program Files (x86)\WUFI\WUFI2D-3\Projects\
DebugMode=0
DatabaseLanguage=1
ExperiencedUser=0
[3.3.2]
BinDirectory=C:\Program Files (x86)\WUFI\WUFI2D-3\
DBEditor=C:\Program Files (x86)\WUFI\Tools\wufi_dbeditor.exe %d %d
DirSep=\
Kernel=C:\Program Files (x86)\WUFI\WUFI2D-3\kernel\x64\w2d_flow-x64.exe

tjcr
WUFI User
WUFI User
Posts: 5
Joined: Mon Feb 03, 2014 4:14 am -1100

Re: Cannot find database error

Post by tjcr » Tue Feb 04, 2014 1:59 am -1100

Christian

I am on windows XP professional version 5.1

"Please check the location of your ibp_24.mb before entering the path." -> how do i do this?

my ini looks very different to yours

Tom

Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 833
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:

Re: Cannot find database error

Post by Christian Bludau » Tue Feb 04, 2014 3:55 am -1100

Hi Tom,
yes, the file is different as other informations are added depending on the settings you make.
how do i do this?
You have to find the path where the database is saved. For Windows XP that should be:
C:\Documents and Settings\All Users\Application Data\WUFI\Database

For XP this should work:

Code: Select all


[Climate]
database="C:\Documents and Settings\All Users\Application Data\WUFI\Database\IBP_24.mdb"
Christian

tjcr
WUFI User
WUFI User
Posts: 5
Joined: Mon Feb 03, 2014 4:14 am -1100

Re: Cannot find database error

Post by tjcr » Tue Feb 04, 2014 4:04 am -1100

Thanks for your help christian

I think we may have sorted it!

Thanks a million

Tom

BaH
WUFI User
WUFI User
Posts: 1
Joined: Tue May 07, 2019 8:06 am -1100

Re: Cannot find database error

Post by BaH » Tue May 07, 2019 8:08 am -1100

I have the same problem, except for WUFI Passive 3.2.0.1, on Windows 10. I tried the %appdata% approach but have been unable to load an editor - I don't see WUFI in the app data directory. Please help!

Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 833
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:

Re: Cannot find database error

Post by Christian Bludau » Tue May 07, 2019 7:26 pm -1100

Hi BaH,
for WUFI Passive it is an different meaning. In this case the database was not installed.
If you call the installation directly from the zip file, the database installer is not found.
Please unzip all files into some folder and the start the installation out of this folder.
Then it should work.
Christian

Post Reply