3D-objects

All about the Software WUFI Plus
Post Reply
yuan
WUFI User
WUFI User
Posts: 7
Joined: Mon Jan 21, 2019 2:51 pm -1100

3D-objects

Post by yuan » Sun Apr 21, 2019 8:12 pm -1100

Hello
I have a question about wufi 3d-object.
I want to use 3D-objects to simulate an ungergroud building hygrothermal. However, WUFI wifi film about 3d-objects is not avaible anymore. I search on the internet and read WUFI help but cannot find more information about how to built a 3D-objects. I am also wondering how to connect a 3d-object with the already built model zone. There are many boundary conditions which share the same name listed in table, and I cannot recognize which is the surface I want to connect with. Are there any more information can be provided?
Thank you!
Attachments
QQ截图20190422152331.jpg
QQ截图20190422152331.jpg (21.23 KiB) Viewed 480 times

mpazold
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 183
Joined: Wed Jul 11, 2012 11:21 pm -1100

Re: 3D-objects

Post by mpazold » Mon May 20, 2019 4:39 am -1100

Hello,

the film should be still available here: https://www.wufi-wiki.com/wufifilme/Plus/Plus_3D.mp4

unfortunatelly the naming of components, to set thier outer side boundary condition to the 3D-Ojbect is wrong in version 3.2.0.1. The only workaround with this version is to color the component (an ungrouped component) in an individual color and double click on each boundary condition until you find the same color (attached picture)
Attachments
color_component.PNG
color_component.PNG (60.93 KiB) Viewed 410 times

Post Reply