Unable to run calculation

Everything concerning the adequate application of WUFI in the USA and Canada depending on local conditions e.g. architecture, building codes, standardization, laws et cetera.
Post Reply
Sum1
WUFI User
WUFI User
Posts: 2
Joined: Fri Jan 11, 2013 5:15 am -1100

Unable to run calculation

Post by Sum1 »

Hi,

I recently installed WUFI ORNL 5.2. After I create an assembly and modify the other parameters as required, the option to run a calculation is grayed out. (All the check marks are green and I have saved the file.) I have even tried the sample files included with no luck, as well as reinstalling the program. Any other suggestions?

Thanks!
Top
Manfred Kehrer
WUFI International Support Team
WUFI International Support Team
Posts: 351
Joined: Thu Mar 10, 2005 2:17 am -1100
Location: Northbrook, IL; USA
Contact:
Contact Manfred Kehrer

Post by Manfred Kehrer »

Hello Sum1,
could you please provide us with Release number.
You will find it at the download menu named "?" | "About WUFI"

Kind Regards,
Manfred
Manfred
Wiss, Janney, Elstner Associates, Inc.
Official WUFI® Collaboration Partner for USA/Canada
Enjoy WUFI® :) .... It is easy and complex.
Top
Sum1
WUFI User
WUFI User
Posts: 2
Joined: Fri Jan 11, 2013 5:15 am -1100

Post by Sum1 »

Release: 5.2.0.972.DB.24.76
Top
Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 1161
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:
Contact Christian Bludau

Post by Christian Bludau »

Hello Sum1,

in Wufi ORNL you only can calculate with film. Please use the symbol right to the two hourglass symbols to calculate.

Christian
Top
Post Reply

Return to “WUFI North America”