WUFI

Posted: **Mon Apr 23, 2018 10:38 am -1100**

If I wanted to use WUFI-Corr to estimate corrosion potential of fasteners in wood construction (eg. plywood nailing), what "binder type" should I use?
The results seem to be heavily dependent on this variable, so I understand that the results for wood would be different, but is there a binder type currently available in WUFI-Corr that approximates the results for wood construction?

Posted: **Mon Jun 04, 2018 6:28 am -1100**

Currently we have no "binder specification" for wooden materials.

Samuel Zelinka did some investigations on that topic and we wanted to extend and implement the data - but unfortunately couldn't get funding for the required additional tests...

best regards
Daniel

Posted: **Mon Jun 04, 2018 1:42 pm -1100**

I really hope you can get the funding for this soon. Seems like the most application use of WUFI-Corr for residential and light-commercial in cold climates.
good luck!

WUFI

using WUFI-Corr to assess corrosion in wood fasteners

using WUFI-Corr to assess corrosion in wood fasteners

Re: using WUFI-Corr to assess corrosion in wood fasteners

Re: using WUFI-Corr to assess corrosion in wood fasteners