Accuracy in Wufi2d
Posted: Thu Jun 21, 2007 1:30 am -1100
Dear Users,
we deliverd Wufi2d3 with a to low standard setting for the convergence criterion. Please notice that a convergence criterion of 5e-4 will lead to a high calculation speed but the accuracy of the results drops down. You have to find a acceptable balance between speed and accuracy.
Please change to the Computational Parameters -> Enhanced and check the value listed for 'Convergence Crit.'. We recommend at least a value of 1e-5. The smaller this value the higher the accuracy.
Christian
we deliverd Wufi2d3 with a to low standard setting for the convergence criterion. Please notice that a convergence criterion of 5e-4 will lead to a high calculation speed but the accuracy of the results drops down. You have to find a acceptable balance between speed and accuracy.
Please change to the Computational Parameters -> Enhanced and check the value listed for 'Convergence Crit.'. We recommend at least a value of 1e-5. The smaller this value the higher the accuracy.
Christian