WUFI Graph

All about WUFI 2D
Post Reply
Kruti
WUFI User
WUFI User
Posts: 14
Joined: Wed Nov 10, 2010 12:09 am -1100

WUFI Graph

Post by Kruti »

Hi,
In Wufi graph the temperature,water content and humidity graphs have an option of selecting the material or selecting the whole construction. Just want to check that does temperature of the whole construction displays the temperature averaged over the whole construction (including all the materials in the construction). Correct me please if I am wrong.
Regards
Kruti
Thomas
WUFI Administrator
WUFI Administrator
Posts: 418
Joined: Sun Jun 19, 2005 10:33 pm -1100

Re: WUFI Graph

Post by Thomas »

Yes, WUFI Graph displays the average over the selected grid elements. The selection may consist of single grid elements, several grid elements (not necessarily touching each other), all grid elements belonging to a material, all grid elements belonging to several materials, combinations of these possibilities, and finally all the grid elements in the construction.

If you want to change the selection of grid elements, do not forget to deselect the previous selection, because it is not automatically deselected. Otherwise you will get the average of the new and the (still existing) old selection.

Regards,
Thomas
Kruti
WUFI User
WUFI User
Posts: 14
Joined: Wed Nov 10, 2010 12:09 am -1100

Post by Kruti »

Thanks for your prompt reply.
Post Reply