Hi everybody,
I did'nt find any low density mineral wood in databases (12 kg/m³), I used the 60 kg/m³ mineral wool from IBP.
Could I consider the simulation to be correct anyway ? Could I modify only the density without generating problems ?
low density mineral wool
low density mineral wool
Last edited by olivir on Sun Dec 21, 2014 11:35 pm -1100, edited 1 time in total.
Re: low density mineral wool
Santa Claus, help ! 
-
Christian Bludau
- WUFI SupportTeam IBP
- Posts: 1186
- Joined: Tue Jul 04, 2006 10:08 pm -1100
- Location: IBP Holzkirchen, the home of WUFI
- Contact:
Re: low density mineral wool
Hohoho, Santa is coming...
Hi Olivir,
as the mineral wool does not have a high moisture storage capability, I think its no problem to change the density.
If you have a measured moisture storage function, you may adapt that proportionally to the change of the density.
Christian
Hi Olivir,
as the mineral wool does not have a high moisture storage capability, I think its no problem to change the density.
If you have a measured moisture storage function, you may adapt that proportionally to the change of the density.
Christian
Re: low density mineral wool
Thank you petit papa Noël !