inputting indoor climate actual data

[GWong]

I'm running into trouble trying to use a .wac file for the indoor climate. Under Climate> Indoor > Map/File, I was not able to browse for the .wac file I created for indoor conditions because the Browse button is greyed out. I'm wondering if there's some setting or options that I chose that is causing this to be a problem?

[Christian Bludau]

Hello GWong,
do you use the Wufi Light or ORNL? In the test versions it is not possible to import your own climate files.
Christian

[GWong]

Hi Christian, I am using WUFI Pro 5.1. I was able to create and use a .wac file for the outdoor climate, but was unable to browse for my indoor climate file using the same process.
Thanks! -Grace

[Christian Bludau]

Hello Grace,
please control if the box "use left climate" is unchecked. It is at the right side of the browse-button.
Christian

[GWong]

That did solve my problem! Thanks Christian!

[samiraaien]

I have recorded hourly indoor Temperature and Humidity of my case study in one year period now I want to import my measurement indoor conditions (Relative Humidity and Temperature) during the whole period of my simulation.I have two questions:
1- Is there a special format for indoor climate or it is same as outdoor?Because for indoor there are just Temperature and Relative Humidity.
2-How can import this created file?
if the box "use left climate" is unchecked, the right side of the browse-button will be activated. Is this way correct for importing the indoor Climate file?

king Regards,
Samira

[Christian Bludau]

Hello Samira,
1) you can use the CreateClimate file. You only need to fill Temperature and relative humidity.
2) yes, you disable "use from left" and then select fom map/file and there use the user-defined tab.
Christian