Hi experts,
Could you please provide me the experssion of the LiMs curves? I want to reproduce the curves using Excel.
LIMs experssion
LIMs experssion
- Attachments
-
- WeChat Image_20220705175850.png (14.55 KiB) Viewed 6316 times
Re: LIMs experssion
Hi WEI LI,
the LIM curves are described by the hyperbolic cosine function as follows:
\(\varphi_\mathrm{lim} = \frac{\cosh(a \cdot (b-x)) + c}{100}\)
(where \(\varphi_\mathrm{lim}\) is expressed as a fraction \(0 ... 1\))
with the constants
Kind regards,
Thomas
Keywords: WUFIBio, LIM, LIMs, isopleth, isopleths, germination, growth
the LIM curves are described by the hyperbolic cosine function as follows:
\(\varphi_\mathrm{lim} = \frac{\cosh(a \cdot (b-x)) + c}{100}\)
(where \(\varphi_\mathrm{lim}\) is expressed as a fraction \(0 ... 1\))
with the constants
Code: Select all
LIM 0: a = 0.128324 b = 30 c = 69
LIM I: a = 0.128324 b = 30 c = 75
LIM II: a = 0.128324 b = 30 c = 78.29
Thomas
Keywords: WUFIBio, LIM, LIMs, isopleth, isopleths, germination, growth
Re: LIMs experssion
Thanks for your reply.
Is it from Sedlbauer, K. (2001). Vorhersage von Schimmelpilzbildung auf und in Bauteilen: Lehrstuhl fur Bauphysik.?
Is it from Sedlbauer, K. (2001). Vorhersage von Schimmelpilzbildung auf und in Bauteilen: Lehrstuhl fur Bauphysik.?
Re: LIMs experssion
Yes, the procedure used by WUFI-Bio is based on this thesis. But I think the mathematical function and the numerical values quoted above have been adopted for the numerical implementation in WUFI-Bio, you won't find them in the thesis.
Kind regards,
Thomas
-
- WUFI SupportTeam IBP
- Posts: 1161
- Joined: Tue Jul 04, 2006 10:08 pm -1100
- Location: IBP Holzkirchen, the home of WUFI
- Contact:
Re: LIMs experssion
Dear Wei Li,
there is also an English version available of this PhD:
Klaus Sedlbauer - Prediction of mould fungus formation on the surface of and inside building components.
https://www.ibp.fraunhofer.de/content/d ... -30729.pdf
Best regards
Christian
there is also an English version available of this PhD:
Klaus Sedlbauer - Prediction of mould fungus formation on the surface of and inside building components.
https://www.ibp.fraunhofer.de/content/d ... -30729.pdf
Best regards
Christian