I'm trying to model a slate castle roof nailed onto oak sheathing without an air gap. How can I define the water vapour diffusion and porosity of this material
?Thanks
Slate roof
Slate roof
Hello,
I'm trying to model a slate castle roof nailed onto oak sheathing without an air gap. How can I define the water vapour diffusion and porosity of this material ?
Thanks
I'm trying to model a slate castle roof nailed onto oak sheathing without an air gap. How can I define the water vapour diffusion and porosity of this material
?Thanks
-
Christian Bludau
- WUFI SupportTeam IBP
- Posts: 1186
- Joined: Tue Jul 04, 2006 10:08 pm -1100
- Location: IBP Holzkirchen, the home of WUFI
- Contact:
Re: Slate roof
Hi,
the only values for the slate roof I found where in a German research report. In there for a slate roof teh following effective sd-values where given:
Natural slate sd = 3,5 m
Synthetic slate sd = 6 m
You can use this sd-values directly as a sd-value in the surface transfer coefficients instead of creating a layer.
Christian
Source of values: Winter, S.: Technische Regeln zur Volldämmung von Altdächern mit unterschiedlichen Dachdeckungen (außer Dachsteindeckung). IZH-Forschungsbericht. März 1994.
the only values for the slate roof I found where in a German research report. In there for a slate roof teh following effective sd-values where given:
Natural slate sd = 3,5 m
Synthetic slate sd = 6 m
You can use this sd-values directly as a sd-value in the surface transfer coefficients instead of creating a layer.
Christian
Source of values: Winter, S.: Technische Regeln zur Volldämmung von Altdächern mit unterschiedlichen Dachdeckungen (außer Dachsteindeckung). IZH-Forschungsbericht. März 1994.