Profiles in the cross-section

All about WUFI 2D
Post Reply
Raymond
WUFI User
WUFI User
Posts: 14
Joined: Mon May 10, 2010 10:17 pm -1100

Profiles in the cross-section

Post by Raymond »

Hello,

In Help/Backgroud we see profiles of water content in the cross-section of wall with abscissa values.

Is it possible to make that kind of graph with WUFI 2D ?

The only way we find to do that is to make a screen shot of wufi motion in pause (paint) but we don't have any value on abscissa to see when we change of component.

Thanking you by advance.

Greetings.
veitner
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 135
Joined: Tue Mar 08, 2005 11:14 pm -1100

Re: Profiles in the cross-section

Post by veitner »

Hi Raymond,

to enable the abscissa values right click in the water content view, select sidepanel/numbering/enabled

Regards
Veit
Christian Bludau
WUFI SupportTeam IBP
WUFI SupportTeam IBP
Posts: 1160
Joined: Tue Jul 04, 2006 10:08 pm -1100
Location: IBP Holzkirchen, the home of WUFI
Contact:

Re: Profiles in the cross-section

Post by Christian Bludau »

Hallo Raymond,

there is at the moment no easy posibility to generate a profile out of the 2d calculation.

But there is a kind of tricky way:
You can extract the data for all grid elements for one time step. Open WufiMotion and go to the time step and value window you need. Then rightclick -> extract -> initial conditions. You will get a data matrix with a mean value for every grid element in a text file.

Out of this file you can try to find the right row or column and plot it. The according distance values (for x or y) you can find in the file called input.dat

Good luck,
Christian
Post Reply